Miter Saw Bench Construction
On a flush drawer I make the drawer fronts 1/8" narrower and 1/8" shorter than the opening, the drawers themselves are 1" narrower to accomodate the slides.
On lipped drawers I make the drawer fronts 1/4" wider than the opening.
| Buy List
|
| 3 | Pine WW | 1 X 2 X 8'
|
| 2 | Pine WW | 1 X 4 X 8'
|
| 2 | Pine WW | 2 X 4 X 8'
|
| 1 | Pine WW | 2 X 6 X 8'
|
| 1/2 Sht | 5mm Hdwd Ply | 3/16
|
| 1/2 Sht | 1/2 Sanded Pine Ply | 1/2
|
| Frame Cut List
|
| 3 | Pine WW | 1 X 6 X 27 | Top: Edge Joined, Trim to 27 X 16
|
| 4 | Pine WW | 2 X 4 X 22-3/4 | Frame Verts
|
| 2 | Pine WW | 2 X 4 X 9-1/2 | Frame Upper Hor
|
| 2 | Pine WW | 2 X 4 X 16" | Frame Lower Hor
|
| 2 | Pine WW | 2 X 4 X 27 | Frame Bottom Stringers
|
| 4 | Casters | 3" | Shepherd Total Locking Casters @ $5.87 Lowes
|
| Drawer Cut List
|
| 4 | Pine WW Rip to 6 | 1 X 8 X 24-1/4 | Frm Front
|
| 4 | Pine WW Rswn 5/16 | 1 X 4 X 15-1/4 | Frm Sides
|
| 2 | Pine WW Rswn 5/16 | 1 X 4 X 23-1/4 | Frm Back
|
| 4 | 3/16" Hdwd Ply | 22-9/16 X 13-9/16 | Bottoms
|