Diagrams and Cut List for Die Plate and Shell Plate Rack for RCBS PRO2000


09/03/13: Add 4X3 Rack.
07/06/13: Page Split from main Die & Shell Plate Rack

These should print on 4 pages: 1st = Cut Lists, 2nd = SW Ammo 3X3 Diagram, 3rd = SW Ammo 4X3 Diag, 4th = Home Rack Diagram.

SW Ammo 3X3 Cut List          
2-1 x 4 x 24-3/8" Side verticals
2-1 x 4 x 12-7/8" Inside horizontals
2-2 x 4 x 13-7/8" Inside verticals(resaw 1" thick, Double sided notches)
1-1/4" Ply 14-3/8 x 19-3/8" Plywood back
1-1/4" Ply 12-7/8 x 4" Plywood Upper back(double)
SW Ammo 4X3 Cut List          
2-1 x 4 x 24-3/8" Side verticals
2-1 x 4 x 17-1/2" Inside horizontals
3-2 x 4 x 13-7/8" Inside verticals(resaw 1" thick, Double sided notches)
1-1/4" Ply 19 x 19-3/8" Plywood back
1-1/4" Ply 17-1/2 x 4" Plywood Upper back(double)

Home Cut List              
2-1 x 4 x 19-3/8" Side verticals
1-1 x 4 x 12-7/8" Inside horizontal
1-1 x 6 x 14-3/8" Inside horizontal
2-2 x 4 x 13-7/8" Inside verticals(resaw 1" thick, Double sided)
1-1/4" Ply 14-3/8 x 19-3/8" Plywood back
1-1/4" Ply 12-7/8 x 4 Plywood Upper back(double)


Southwest Ammo 3X3 Rack



Southwest Ammo 4X3 Rack



Home Rack